Bamboo Roman shades belong to the category of elegant yet affordable window treatments. The classic Roman shades design gives them a very natural look and also helps keeping their price low, because no fancy mechanisms are involved in operating Roman blinds. All they need to move are the strings. This makes them extremely easy to install, too. Although they can’t be used as total blackout window treatments, bamboo Roman shades can provide various degrees of light filtering, depending on how they are woven or if other materials such as wood or matchsticks are alternating with the bamboo slats.

How To Measure For Bamboo Roman Shades

Measuring for bamboo Roman shades depends on the installation type. For inside mount installation, shades need to measure 1/2" less in width than the glass pane. The 1/2" difference will be distributed evenly between the two edges, so the shade will fit well into the window frame. If the difference is bigger, the shades will still fit, but they will allow too much light to pass through the edges, and that could be bothering and not very appealing, esthetically speaking. A smaller difference will cause the shade to fit too tight inside the frame, therefore being exposed to premature wear in case of frequent manipulation.

Inside mount is a bit tricky, because some windows don’t offer enough depth for making it possible, so that’s the first measurement that needs to be taken in order to make sure the windows are appropriate for this type of mount. Typically, the minimum depth for an inside mount should be 1/2" and the depth for a flush fit should be minimum 2”.

When taking the measurements for inside mount installs, it’s always wiser to take three such sets: one at the top, one at the middle and one at the bottom of the window. For measuring the height, three sets are also required: left side, middle and right side. It happens sometimes that windows are not even, therefore the smallest measurements should be taken into consideration in order to avoid surprises.

For outside mount, the exact area to be covered by the shade needs to be measured. It should include also the headrail (this needs to be clearly specified to the shop assistant, as some stores may require different ways of measuring).

When buying made-to-measure Roman shades, measurements should be done with extreme care, because such shades can’t usually be returned to the shop in case they don’t fit. Their custom nature makes them unique, so the probability for the vendor to be able to find another buyer for those custom bamboo Roman shades is very small.